Here is the general instructions on how to Set up a Wifiblast Repeater using the IP address http://192.168.188.1. Please note that the specific steps may vary depending on the brand and model of your Wifiblast repeater.
Wifiblast Setup:
- Plug in the Wifiblast WIFI repeater and connect your computer or mobile device to its Wi-Fi network.
- Open a web browser and go to the IP address http://192.168.188.1.
- Enter the default username and password (usually “admin” for both) to access the repeater’s settings.
- Follow the on-screen instructions to configure the repeater’s network settings, such as the SSID and password of the WiFi network you want to extend.
- Save your changes and wait for the Wifiblast repeater to restart.
How to RESET Wifiblast Repeater-
- Find the reset button on the Wifiblast repeater (usually a small hole or button).
- Use a paperclip or similar tool to press and hold the reset button for 10 seconds.
- Release the button and wait for the repeater to restart.
Firmware Update:
- Go to the manufacturer’s website and download the latest firmware for your Wifiblast Wi-Fi repeater.
- Connect your computer or mobile device to the Wifiblast repeater’s WIFI network.
- Open a web browser and go to the IP address http://192.168.188.1.
- Enter the username and password to access the repeater’s settings.
- Look for a firmware update option and follow the on-screen instructions to upload the new firmware file.
- Wait for the repeater to restart and the firmware update to complete.
Connect Device using WPS:
- Press and hold the WPS button on the Wifiblast repeater for 3 seconds.
- Within 2 minutes, press the WPS button on your device (such as a phone or laptop).
- Wait for the Wifiblast repeater and device to connect to each other.
- The device should now be connected to the extended WiFi network.
How do I connect my Wi-Fi booster with the address 192.168.188.1?
To connect your 192.168.188.1 WIFI extender, you need to plug it in, connect to its WIFI network, access the setup page through a web browser, configure its settings, save the changes and connect your devices to the extended Wi-Fi network.
How can I access the router’s admin Page?
Launch a web browser, type the router’s IP address 192.168.1.188 into the address bar, enter the username and password when prompted, and hit the login button to access the router’s administrative interface.
Also Read- SilverCrest extender setup
